|
Nitrogen Plant Process
Atmospheric air contains 78 % of nitrogen & 21% of oxygen. Nitrogen in PSA (Pressure Swing Adsorption) Method is generated by Physical separation of oxygen from atmospheric air and outlet the Nitrogen is collected for use.
The compressed air is passed through PSA Tower which is interconnected with automatic changeover valves. In this Process, We can provide separate /Desiccant air Dryer. This has tendency of adsorbing moisture from compressed air. After that Dried compressed air will now come in contact with bed of carbon molecular sieves (CMS). Carbon Molecular Sieves are special grade of adsorbent which have the property of preferential adsorption of oxygen molecules. At a time one tower remains under nitrogen production cycle, whereas the other tower undergoes regeneration which is achieved through depressurization of the tower to atmospheric pressure. The two towers of PSA modules are inter-connected with automatic changeover valves through pneumatic signal given by solenoid valve which in turn get the electrical signal from the timer provided in the control panel. The changeover time cycle will be 1 1 minute. The outgoing nitrogen gas is sent to a surge vessel where the minimum nitrogen pressure will be maintained with the help of Back pressure Regulator. The product nitrogen will now be sent to the consumer point through a pressure reducing valves at required pressure.
Why Trimech Engineers pvt.ltd.
* Fully Automatic Operation requiring no special attention
* Generates Nitrogen as and when it required
* Easy to install and maintenance free
* Purity of Nitrogen up to 99.9999% can be achieved
* Generates Nitrogen Gas at almost 1/10th cost of cylinder of nitrogen
Advantage of M/S Trimech Engineers pvt.ltd make Nitrogen Plant
* ADDED TWO TYPE OF AUTOMATION PROVIDED (1W 1S)
* WE HAVE PROVIDED RS 282/Rs 485 PORT PROVISION ONLY,
* PROVIDED BYPASS ARRANGEMENT IN ROTAMETER
* PROVIDE SEPARATE AIR DRYER FOR BATTER DUE POINT (WITHOUT ANY PRESSURE & PURGE
DROP)
* MORE FILTRATION LAVEL PROVIDE (WITHOUT ANY PRESSURE DROP)
* AFTER FILTRATION LEVEL THE OIL CONTAIN IS 0.003 PPM
* TWO YEAR FREE SERVICE SUPPORT.
* PIPING BETWEEN PSA TOWER WILL BE S.S 316/SS 304 Or SA 105
* PER NM3 COSTING: 2.5 to 3RS.
|
